NickD's latest activity

  • N
    NickD replied to the thread Question on o2 sensors.
    I like "REDUBMDANT!" for redundant.
  • N
    NickD replied to the thread Alldata User Discussion.
    Was just pointing out back then with any vehicle could get a full service manual with free shipping from a coupon in the rear of your...
  • N
    NickD replied to the thread Question on o2 sensors.
    Ya, upsteam front downsteam rear, upstream right downsteam left, four different O2 sensors. Use to be just one, they are extremely slow...
  • N
    Daily driver in the northern salt belt area won't even last 7-8 years before it turns into a pile of rust, looks like yours lasted 16...
  • N
    Blown fuses are a nightmare generally rated at 150-200% of the normal current draw, something is shorting out. Could a cable close to a...
  • N
    NickD replied to the thread PO101 Mass air flow..
    Another problem with these things, the PCM requires a start voltage of at least 8.5 volts so that its microcontroller gets a proper POR...
  • N
    NickD replied to the thread R134a port caps.
    Would something like this work that would screw unto the R-134a caps making sure nothing inside will open the ports. Could use...
  • N
    NickD replied to the thread R134a port caps.
    Back then, nobody in the US heard of the metric system of units and some weird thread sizes were used, but spark plugs of today are more...
  • N
    NickD replied to the thread Moth in Engine!.
    We have some here in the cliffs of LaCrosse and Winona, but they are slow and stupid. Not like those sidewinders out west or down south...
  • N
    NickD replied to the thread Moth in Engine!.
    Down south a buddy of mine opened his hood to find a rattle snake coil up on his air cleaner. Just looking for a warmer spot to spend...
  • N
    NickD replied to the thread ac blows cold then hot.
    A company I was working for 50 years ago wanted to make an engine compression tester with screw in fittings as opposed to using a...
  • N
    NickD replied to the thread ac blows cold then hot.
    I was tricked Bill, should report the seller, but a closer looked revealed aluminum coated plastic. In doing another search,many are...
  • N
    NickD replied to the thread Alldata User Discussion.
    Have a 5,000 page shop manual for our 2017 Hyundai Elantra Limited in pfd format, using Adobe Acrobat Pro that has a far superior search...
  • N
    NickD replied to the thread ac blows cold then hot.
    Did find chrome plated brass with neoprene seal inside for my tire valves, these would fit on an R-12 system, hexed shape so could use...
  • N
    NickD replied to the thread ac blows cold then hot.
    Mechanical high pressure switches were common back then if you don't mine back then. Today, using a thermistor plugged into a BCM to...
Top