Presure washer kickback

Discussion in 'Small Engines' started by billj, Jun 30, 2016.

  1. billr

    billr wrench Staff Member

    Mar 12, 2007
    Likes Received:
    "If the key shearded, we would not be having this discussion."

    Why? I think the flywheel could move "just a little", then reconnect due to galling or catching on the rough key remnants. A gear puller will work (that's what I usually use), but using the provided holes is safer for the flywheel; less chance of bending it. I use a 16-oz hammer, and all of that...

Share This Page