Kenver

Discussion in 'Transmission Forum' started by Kenver, Dec 19, 2016.

  1. Kenver

    Kenver Newbie

    Joined:
    Dec 16, 2016
    Messages:
    4
    Likes Received:
    0
    Gender:
    Male
    Please fill out the following to ask a question.

    MAKE: Ford
    MODEL
    : f150
    YEAR: 2004
    MILES:188760
    ENGINE: 5.4l
    DESCRIBE ISSUE....no power to transmission bulkhead.
    Is there on back of engine needed to be grounded to close circuit from pcm to transmission bulkhead.
     
  2. billr

    billr wrench Staff Member

    Joined:
    Mar 12, 2007
    Messages:
    5,608
    Likes Received:
    52
    That isn't clear to me. Is English a "second language" for you? Perhaps you can get a friend or relative to give you some help in clarifying.
     
  3. Kenver

    Kenver Newbie

    Joined:
    Dec 16, 2016
    Messages:
    4
    Likes Received:
    0
    Gender:
    Male
    I got it English is fine. I found Problem with feed to Bulkhead. Fixed it. Now truck is running fine bad connection at harness that feed bulkhead from computer harness. Plug had debris that was blocking connection. O/D light out an transmission malfunction lite out.
     

Share This Page