1994 Honda Accord EX Brake rotor removal

Discussion in 'Import Vehicles' started by gearshift, Nov 21, 2009.

  1. gearshift

    gearshift Newbie

    Joined:
    Nov 21, 2006
    Messages:
    5
    Likes Received:
    0
    What is the procedure to remove the front brake rotor from my 1994 Honda Accord?
    Thank you for any advice.
     
  2. Paul

    Paul I'm The Decider

    Joined:
    Nov 14, 2006
    Messages:
    1,576
    Likes Received:
    0
    Location:
    Usa
    I believe those are trapped brake rotors.You have to remove the steering knuckle and then remove the hub from the rotor in order to replace the brake rotor.
     
  3. keith

    keith Sr. Member

    Joined:
    Dec 21, 2007
    Messages:
    176
    Likes Received:
    0
    If the rotor is behind the hub, which I believe it is on your car which is why you are asking, then you lock a slide hammer on the lug nuts and pull the hub out of the bearing by beating the slide hammer. Good luck I did one two weeks ago and my wrist was hurting for two days, I was beating the slide hammer for 45 minutes on one side other side came right out.
     

Share This Page