Mac 10 10

BAT Auto Technical

July 31, 2010, 04:53:43 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

News: Some email providers block activation emails. If you use Hotmail, Compuserve, AOL or several other email providers, they may block the activation emails. If you do not receive the activation email, let us know.

Home

Help

BAT Auto Technical > Open Discussions > Small Engines. > Mac 10 10

Pages: [1] Go Down

« previous next »

Author

Topic: Mac 10 10 (Read 535 times)

richard

Full Member

Offline

Posts: 60

Mac 10 10

« on: October 19, 2009, 05:52:54 AM »

Have an older Mccoullgh chain saw .Will not start , have repaced the fuel line, and rebuilt the walbro carb , It will start and run when i dump a little gas in the carb bit then it will just die like it runs out of gas .Any ideas ?

Thanks


	Logged

richard

Full Member

Offline

Posts: 60

Re: Mac 10 10

« Reply #1 on: October 25, 2009, 08:17:44 AM »

Found a small hole in the fuel line ,fouled plug and adjusted the carb .Now seems to run fine .If anyone is interested FYI


	Logged

Pages: [1] Go Up

« previous next »

Contact Us | Banner ads/Advertising | Disclaimer
Technical Index | Forum Rules | Help
©Copyright 2001-2007 batauto.com, BAT Auto Technical.
All Rights Reserved.
May not be reproduced without express written consent.

Disclaimer: We cannot guarantee the accuracy of all information.
Please confirm the information with an appropriate manual
We try and make them as accurate as we can, but sometimes we all make mistakes.