BAT Auto Technical
September 08, 2010, 07:14:11 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Some email providers block activation emails. If you use Hotmail, Compuserve, AOL or several other email providers, they may block the activation emails. If you do not receive the activation email, let us know.
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: headlamps  (Read 187 times)
kev2
BAT Mechanic Member
wrench
*
Offline Offline

Posts: 1766


« on: June 06, 2010, 01:00:56 PM »

  cleaning plastic headlamps....  I have no idea what to recomend?
   somewhere between wiping with windex and getting the 2000grit, abrasive paste, special pads &  buffing  there must be a product...

  20yrs ago as a F15 mechanic I would clean aviation plastics with a wipen on wipe off.... and today   I would use?Huh??
   
Logged
Roger R.
Newbie
*
Offline Offline

Posts: 13


« Reply #1 on: June 07, 2010, 10:15:18 AM »

I was just reading a post from the Toyota forum and that subject was discussed.  The address below goes to that post so you may read it yourself.  I do hope I am NOT violating any forum rules by posting this address, certainly not my intention.  Hope this helps........Roger R.

http://www.toyotanation.com/forum/showthread.php?t=344873
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact Us | Banner ads/Advertising | Disclaimer
Technical Index | Forum Rules | Help
©Copyright 2001-2007 batauto.com, BAT Auto Technical.
All Rights Reserved.
May not be reproduced without express written consent
.

Disclaimer: We cannot guarantee the accuracy of all information.
Please confirm the information with an appropriate manual
We try and make them as accurate as we can, but sometimes we all make mistakes.

Powered by MySQL Powered by PHP Powered by SMF 1.1.10 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!